Universal Hydraulik GmbH® heat exchangers, oil cooler, fail-safe cooler, oil-air cooler, oil-water cooler

Heat Exchangers
Oil/Water: AM
Oil/Water: EKM
Oil/Water: ECM
Oil/Water: CM
Oil/Water: SSCM
Oil/Water: Failsafe/AMFS
Oil/Water: UKM
Oil/Water: UKTM
Oil/Water: UKCG
Oil/Water: FKN
Oil/Air: LKI
Oil/Air: LKI-HYD
Oil/Air: LKM
Oil/Air: DF
Oil/Air: MA/BOL
Oil/Air: MF
Oil/Air: OCA
Oil/Air: PTÖK

Plates: TL

Plates: PWT
Thermo-Filter: TFSA
Cooling-Filter-Systems
Accessoires WRV
Accessoires TR 12
Pumps
Cylinder
Filters
Systems
Customer Support

m.uhl@universalhydraulik.com

Data sheet TL download (tl.pdf)
Plate heat exchangers TL

Plate heat exchangers
type TL

Bolted version for industrial use
Advantages Compact design, low space requirements, low weight
Modular system offers high degree of flexibility, capacity adjustment by adding or removing plates
easy to clean
quick and low cost installation
easy to service
high specific thermal efficiency, suitable for low temperature differences
excellent fouling resistance due to high turbulence and smooth surfaces
high resistance to corrosion

Working Principle

The media involved in the heat exchange process are fed into the plate pack via connections on the fixed and movable pressure plates. The arrangement of the plate pack creates two interleaved channel systems enabling the two media to flow past and between each other without physical contact, leaving the exchanger again via connections in the pressure plates.
Plates with different patterns can be mixed in the heat exchanger in order to achieve optimum efficiency at a given pressure drop. By installing special distribution plates in the plate pack the media can be conducted several times through the flow channels and thus participate longer in the heat exchange process.

Description of Apparatus

Thermo Line plate heat exchangers consist of a number of corrugated plates. The plate pack is mounted between a fixed and a movable pressure plate, positioned by an upper and a lower carrying bar, and compressed by several tightening bolts.
Gasketed type plates and welded modules with various patterns are available for a wide range of applications. The media can pass the heat exchanger either in concurrent or counter-current flow.
Depending on the operating conditions media and temperature-resistant gaskets of the glued on or clipped on version are used. The welded plate module forms are hermetically sealed flow channel to the outside. The transition from one module to another is sealed by a ring gasket made of a special material.